Industrial workshop seismatic retrofitting

Due to the increase of the bearing capacity of the roof and seismic strengthening, it is necessary to reinforce the frame beam and floor with carbon fiber fabric and steel plate.

The workshop was built in 80s, the original structure is two storey frame structure, and the column foundation is 1.8 meters deep. Due to the expansion of the owner's production scale, the original plant can not meet the new equipment layout needs, so according to the new load-bearing situation of the factory, the reinforcement and transformation of the factory will meet the load bearing requirements. Due to the increase of the bearing capacity of the roof, it is necessary to reinforce the frame beam and floor with carbon fiber fabric and steel plate.

Industrial workshop seismatic retrofitting


Industrial workshop seismatic retrofitting


Industrial workshop seismatic retrofitting


Industrial workshop seismatic retrofitting










Horse Construction Recommended Products

You can find anything here you are in need of, have a trust trying on these products, you will find the big difference after that.

HM-20 Unidirectional Carbon Fiber Wrap

High strength, unidirectional carbon fiber wrap pre-saturated to form a carbon fiber reinforced polymer (CFRP) wrap used to strengthen structural concrete elements.

See more >

HM-120 Steel Bonding Adhesive

Two-component epoxy modified epoxy structural strengthening adhesive for bonded steel plate to concrete

See more >

HM-120M Steel Jacketing Adhesive

Modified epoxy resin structural perfusion adhesive, specifically for supporting adhesive bonded steel reinforcement

See more >

Back
Top
Close